CISCO Packet Tracer

Configuring Router with Switch

Adding static IP

Router>en
 
Router#conf t
 
Enter configuration commands, one per line. End with CNTL/Z.
 
Router(config)#int f0/0
 
Router(config-if)#ip address 192.168.1.1 255.255.255.0
 
Router(config-if)#no shut

Adding Dynamic IP

Router>en
 
Router#conf t
 
Enter configuration commands, one per line. End with CNTL/Z.
 
Router(config)#int f0/1
 
Router(config-if)#ip dhcp pool A
 
Router(dhcp-config)#network 192.168.2.0 255.255.255.0
 
Router(dhcp-config)#default 192.168.2.1
 
Router(dhcp-config)#no shut